TECH SPECS



Mishimoto is the world leader in performance cooling for the Automotive, Truck, Jeep, and Powersports communities. Watch to learn about everything we do and who we are!

Increase in Oil Capacity
.65 Quarts (0.62L)

Temperature Difference
30+°F (16.7+°C)

Pressure Drop
3-5 PSI

Purchase Includes
(2) Application Specific Mounting Brackets and Spacer
(1) 19 Row Oil Cooler (Silver or Black)
(1) 3', 8" Stainless Steel Braided Hose with Straight and 90 Degree -10AN Fittings
(1) 2', 11" Stainless Steel Braided Hose with 45 Degree and 90 Degree -10AN Fittings
(1) Thermostatic Sandwich Plate (Non-Thermostatic Available)
(1) ¾" x 16" Stainless Steel Sandwich Plate Adapter
(2) M20 x -10AN Straight Fittings
(1) Mounting Hardware Set

Engine codes
2.0L EcoBoost

Chassis Codes
C-car Platform

Note
This kit is designed to work by removing the active grill shutters to obtain maximum airflow to the oil cooler
This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit
Recommended torque specification for all straight fittings and banjo bolts: 15-25 ft/lbs (operating range). Do not exceed the maximum torque rating of 35 ft/lbs.

PRODUCT ENGINEERING


DESCRIPTIONTurbocharged, high stress 4 cylinder engines like the 2.0L EcoBoost engine in the Focus ST can overheat their oil very quickly within a few laps on the track or aggressive street driving. Even with the stock liquid-liquid head exchanger, the engine can still run very hot and run the risk of overheating the engine’s coolant as well. Aggressive tunes and some track miles can significantly overheat your oil wear down your engine. Leave it to Mishimoto to come up with an oil cooling solution to your Focus ST!

The Mishimoto engineers started with a large 19-row oil cooler and mounted it in the front of the vehicle where it receives the most airflow. The oil cooler was mounted on the passenger side as to not interfere with some aftermarket air intake systems. Application specific braided stainless steel lines transfer the oil from the cooler to the engine and feature -10AN fittings for an easy installation. Mishimoto engineers saw consistent temperature decreases of over 30°F (16.7°C) using our non-thermostatic sandwich plate. Proving that this oil cooler kit can withstand the stresses of the most extreme applications. This oil cooler kit is available with either a Stealth Black or Sleek Silver cooler and your choice of the Mishimoto Oil Sandwich Plate or the Mishimoto Thermostatic Oil Sandwich Plate. As with all our products, this kit includes the Mishimoto Lifetime Warranty.

LIFETIME WARRANTY


Mishimoto Automotive (“Mishimoto”) warrants its products under this lifetime limited warranty policy (“Warranty Policy”). This Warranty Policy applies solely to: (i) Mishimoto Products purchased directly from Mishimoto or Mishimoto authorized dealers (each a “Mishimoto Product” and collectively, the “Mishimoto Products”) and (ii) the original purchaser of such Mishimoto Product (“Purchaser”). This Warranty Policy is non-transferable and all claims under this Warranty Policy must be accompanied by the original sales receipt. The terms and conditions of this Warranty Policy are subject to change by Mishimoto at any time without notice.

For our complete warranty policy, please click here.


Direct-fit for the 2013+ Ford Focus ST
Reduces oil temperatures by 30°F (16.7°C)
Minimal pressure drop
Application-specific mounting brackets
Oil cooler location does not interfere with aftermarket air intakes
Works with stock and all aftermarket front mount intercooler kits
Pre-made stainless steel braided oil lines with durable -AN fittings
Billet aluminum oil sandwich plate
19-row stacked-plate oil cooler for optimal fluid temperature reduction
Thermostatic and Non-thermostatic options available
Cooler available in either Sleek Silver or Stealth Black
Increases oil capacity by .65qt
This oil cooler kit retains the use of your stock liquid to liquid oil cooler unit
Mishimoto Lifetime Warranty